MEP®. CREPI DOSE is a special blend of plasticizer and water-repellent agent specially design for traditional grey render

USES

MEP®. CREPI DOSE is used to optimize the curing and to increase the water-resistance characteristic of traditional cement render

• ▪ External façade render
• ▪ Internal wall render

FEATURES AND BENEFITS

• • Increase the curing properties of the cement plaster
• • Improve the workability of the cement plaster
• • Vapor breathable
• • Economical

SAFETY DATA SHEET REQUEST      DOWNLOAD PRODUCT SPECIFICATIONS

1. Dosage ratio: 1 x MEP®. CREPI DOSE per 25 kg of cement

   ▪ Gradually add the powder into the cement + sand before addition of the water
   ▪ The use of a mechanical mixer or a concrete mixer is highly recommended to ensure that the powder is correctly mixed to give optimum performance

2. LIMITATION

   •MEP®. CREPI DOSE is not a substitute or will not improve poor render/mortar mix, mix design or incorrect cement/water ratio

3. RECOMMANDATIONS

   ▪ It is imperative that the MEP®. CREPI DOSE is toughly mixed/dispersed into the render/mortar mix
   ▪ Do not apply in wet weather, or in temperatures below 5ºC or over 35ºC
   ▪ Dampen the surface prior to application
   ▪ Avoid application under a full sun or on a very hot surface. This can cause shrinkage cracks and/or the loss of mechanical strength in the one coat mortar applied

4. PRACTICAL INFORMATIONS

   ▪ Packaging: plastic “dose pack”
   ▪ Handling and storage: 24 months if kept in a dry cool place in the original packaging
   In more extreme conditions this period might be shortened
   ▪ Tools: Low speed mechanical mixer, concrete mixer, trowel