MEP®.COL Primo
Commonly used adhesive mortar. (C1)
SEE MORECovers: 150 g / m²
Contain: Bucket 5kg & 20kg
Floor: inside/outside | Wall: inside/outside
Ready to use
View video
MEP®.PRIM BP is a styrene acrylate primer which is use as a general-purpose pore sealer for priming (pre-treating) flooring prior application of topcoat system.
Ensure that the surfaces are not subjected to rising damp
The surface must be clean and free of dust, release agent, fungi
Remove any friable residues (peeling paint, old adhesive for vinyl tiles, laitance, etc)
MEP®. PRIM BP is ready to use and do not need addition of water
Apply directly to the surface, using a “soft microfiber roller”
Complete coverage of all surfaces is essential
Avoid any ponding and make sure uniform film has been applied
o Drying time takes between 15min to 2 hours under normal condition (at +20°C)
o other night under poor conditions
NB: In case of a second coat application, wait for the product to set until fully dry
Not suitable for tile on tile application – use MEP®. PRIM PLUS
Do not use on surfaces subject to rising damp
Not suitable for heavy duty traffic
Do not apply in full sunlight
Clean the tools with water before the product dries
The room temperature will be between +5ºC and +35ºC
Packaging: 5kg and 20Kg plastic bucket
Handling and storage: 6 months if kept in a dry cool place in the original packaging
In more extreme conditions this period might be shortened
Tools: Paint Brush, Roller